DECALS

are our speciality

Designed, developed and manufactured in France, these labels can be fitted to a large number of surfaces (marble, glass, steel, cardboard, wood, carbon, polyethylene ….) and are compliant with the REACH directive.

Different uses of dry decals :

Loading...

EASYTRANS & T3+

New generation of self-adhesive decal

More Economic

No strip-spacing costs
No cut costs
Adapted to big and medium series

More Aesthetics

Final aspect : direct printing
Thickness from 50 to 60 microns
Panton colours guaranteed
Sharpness of line

More Solid

Screen-printed
Chemical Resistance
UV Resistance
Tear-proof

More Practical

Rapid installation
Easy positioning
Adaptable to every type of surface

More Ecologic

Without PVC
Without CMR
“Imprim’vert” certification

More Industrial

40 years of experience
1200 m² of dedicated workshop
ISO-certified

The chart below will allow you to determine the most appropriate solution to your needs.

Contact-us !

Selective varnish

The technology developed by Translog allows us to obtain a finish of an incomparable quality. Contrary to an adhesive label, the dry transfer allows a result which looks like an inlay in the material. According to the supports to decorate you can choose a joint varnish, a 0.3 mm varnish or a 0 mm varnish (specific for monochrome decals).

Joint varnish

The first proposition, called “joint varnish” connects all the letters or the different forms between them. Advantages of this solution:

Easy and fast to install
Chemical and UV resistant
Abrasion resistant
Thickness of the line: < 1mm.

The 0.3mm varnish was refined by our specialists to get a quality close to invisibility. Advantages of this solution:

High quality final aesthetic aspect
Chemical and UV resistance
Thickness of the line: < 1mm

Varnish 0.3mm

Varnish 0mm

This varnish is only available for monochrome printing. The thickness of the printing has to be over 1mm. Advantages of this solution :

Aspect: “direct printing”
Final aspect on dark support
Chemical and UV resistance

Real-made to measure

Our standard decals, “Easytrans” and T3+, are studied and designed for the industry and allow the marking of many supports (see comparative chart). Nevertheless, all the products, even if they are performant, are of little interest if they are not adapted to a specific need. Today, thanks to our 40 years of experience and characterisation tools, we can offer a marking solution from our manufacturing standards adapted to your specific requests.

So, to give you an adequate solution, we study the following parameters with you:

Type of support to mark

Colours
Surface Finish
Manufacturing Process

Marking conditions

Multi-support marking
Rhythm of installation
Positioning Precision

Life condition of the support

Interior / Exterior
Chemical aggression
Abrasion

Each project has its own specificity and may require an in-depth study. We have therefor invested in analysis equipment to be able to characterise technically each of your specific needs. In 2014, to validate the coherence of our initiative, we were able to widen our certification ISO 9001 to the “design” of decals.

Contact-us !

Use and characteristics

Because even the best product applied to an oily, humid, dusty surface will never allow for correct sticking, it is necessary to prepare the marking surface.

  • The surface to mark has to be dry and clean.
  • Make sure that the objects to mark are not dusty, without fat, oil, and release agents.
  • If necessary, clean the surface surfaces with a clean, not fluffy cloth and a solvent compatible with materials.

1. Prepare

To prepare the marking, after having cleaned your support, you simply have to return the transfer and remove the silicon paper-protection which is behind the marking.

2. Apply

After having placed the transfer, you can apply it on the surface to be marked. The transparent transfer film allows you to position the decal easily.

3. Transfert

Even a surface which seems flat has some harshness. A pressure on the dry transfer with a scraper or a stick allows the glue to penetrate into these irregularities.

Remove the transparent plastic front support carefully.

« Translog proposes simple and practical solutions to optimise markings conditions. »

Visual
marks

To help you for your marking positioning, we can print on the transfer support some non- transferable visual marks to allow you to position your decal very precisely.

Pre-cuts
of positioning

To facilitate the installation and the positioning of the transfer, it is possible to cut the support to allow the best conditions to install the marking.

Calibrated
transfer support

Thanks to the precision of our formats, we can propose positioned markings in a very precise way on their transfer supports (+/-0.2 mm). It allows you to position exactly transfer in abutment on templates installations (alphabet transfer or markings for licences plates).